Mon SSD n'est plus reconnue, puis l'est à nouveau

a marqué ce sujet comme résolu.
Auteur du sujet

Bonjour,

J’ai un problème aléatoire et non reproductible avec mon PC.

Version courte : mon SSD a disparu de la liste des disques bootable du BIOS (UEFI, en vrai, je pense qu’on n’a plus de BIOS) hier soir. Après débranchement - rebranchement des câbles ce matin, il est réapparu. Ce débranchement n’avait rien fait hier soir. Je suspecte le SSD, les câbles, et la carte mère. Comment discriminer l’élément perturbateur pour pouvoir contacter le service client sans renvoyer tout le PC ?

Version longue :

OS : Linux OpenSUSE 15.1, à jour.

Mon PC a un an. Dès l’installation, j’ai eu des problèmes : l’installation se coupait au milieu, et par la suite le SSD n’était pas reconnu. Contact service client : ils me disent de changer les câbles. Je prends ceux de mon ancien PC, et ça marche.

J’aurai par la suite des gels complets du PC (plus de réponse du clavier ou de la souris, son qui boucle si je regarde une vidéo…) de manière rare mais récurrente (1 fois toutes les 2 semaines environ). Les outils de vérification que j’ai pu utiliser (smartctl) me renvoie du tout vert. Pas d’erreur. Parfois, le gèle prévenait qu’il allait venir : gèle d’un programme (typiquement navigateur ou lecteur vidéo). Seule solution : éteindre le PC, et ne pas le redémarrer de suite. Sinon, le gel arrivait très rapidement.

Je suspecte alors la mémoire vive (sans raison rationnelle valable). Je la teste (memcheck), et fini par trouver une erreur ! Je relance le test sur une barrette, puis l’autre ; pas d’erreur. Les deux à nouveau, pas d’erreur. Les gels deviendront beaucoup moins fréquents. Erreur aléatoire, rare, se raréfiant plus encore, et non reproductible : je n’ai pas contacté le service client.

Hier soir, mise à jour noyau + pilote graphique (donc mise à jour de la liste Grub sur le SSD). Ne démarre plus ; le SSD n’est plus reconnu, et ce dès le BIOS. Changement de câble (avec les défectueux livrés avec le PC) : pas de changement. Remise des anciens ce matin : ça remarche…

Avez-vous une idée pour discriminer la ou les pièces qui plantent (SSD, câbles, carte mère ?) ou pour trouver un moyen de rendre l’erreur reproductible ?

Merci beaucoup. :)

Il y a bien des façons de passer à l’acte. Se taire en est une. Attribué à Jean-Bertrand Pontalis

+0 -0
Auteur du sujet

Je ne vois rien de particulier. Message en rouge :

[    3.905535] sd 11:0:0:0: [sdb] No Caching mode page found
[    3.905629] sd 11:0:0:0: [sdb] Assuming drive cache: write through

[    4.747909] sp5100_tco: I/O address 0x0cd6 already in use

[    9.948045] ccp 0000:27:00.2: sev command 0x4 timed out, disabling PSP 
[    9.948047] ccp 0000:27:00.2: SEV: failed to get status. Error: 0x0
[    9.952641] kvm: disabled by bios
[    9.998629] kvm: disabled by bios

Sortie complète :

~/ dmesg 
[    0.000000] Linux version 4.12.14-lp151.28.20-default (geeko@buildhost) (gcc version 7.4.1 20190424 [gcc-7-branch revision 270538] (SUSE Linux) ) #1 SMP Tue Oct 8 05:42:34 UTC 2019 (2982b5d)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.20-default root=UUID=9a68ef69-6852-4c96-9a4b-5a6991813965 resume=/dev/sda2 splash=silent quiet showopts nouveau.modeset=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dae1efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dae1f000-0x00000000dc30cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dc30d000-0x00000000dc401fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dc402000-0x00000000dc7d8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dc7d9000-0x00000000dd23ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd240000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Pro4, BIOS P1.50 11/05/2018
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Using PIT calibration value
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000420000000 aka 16896M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x03086000, 0x03086fff] PGTABLE
[    0.000000] BRK [0x03087000, 0x03087fff] PGTABLE
[    0.000000] BRK [0x03088000, 0x03088fff] PGTABLE
[    0.000000] BRK [0x03089000, 0x03089fff] PGTABLE
[    0.000000] BRK [0x0308a000, 0x0308afff] PGTABLE
[    0.000000] BRK [0x0308b000, 0x0308bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x350fb000-0x36874fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DC402098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DC408648 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-624)
[    0.000000] ACPI: DSDT 0x00000000DC4021E8 00645B (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DC7C1E00 000040
[    0.000000] ACPI: APIC 0x00000000DC408760 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DC408840 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DC408888 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DC408928 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DC4115C0 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DC413018 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DC413BE8 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DC413C18 002C36 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DC416850 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: AAFT 0x00000000DC416890 00030C (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DC416BA0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DC416BD8 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DC416C00 000048 (v01                 00000000      00000000)
[    0.000000] ACPI: IVRS 0x00000000DC416C48 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DC416D18 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DC418760 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: WSMT 0x00000000DC418858 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f36a000-0x41f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009cfffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20a000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000dae1efff]
[    0.000000]   node   0: [mem 0x00000000dc30d000-0x00000000dc401fff]
[    0.000000]   node   0: [mem 0x00000000dd240000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.000000] On node 0 totalpages: 4177094
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14055 pages used for memmap
[    0.000000]   DMA32 zone: 899498 pages, LIFO batch:63
[    0.000000]   Normal zone: 51150 pages used for memmap
[    0.000000]   Normal zone: 3273600 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae1f000-0xdc30cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc402000-0xdc7d8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc7d9000-0xdd23ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 48 pages/cpu @ffff88041ec00000 s159744 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s159744 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4111804
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.20-default root=UUID=9a68ef69-6852-4c96-9a4b-5a6991813965 resume=/dev/sda2 splash=silent quiet showopts nouveau.modeset=0
[    0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 491520 bytes
[    0.000000] log_buf_len min size: 262144 bytes
[    0.000000] log_buf_len: 1048576 bytes
[    0.000000] early log buf free: 248600(94%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 5719180K/16708376K available (10256K kernel code, 1462K rwdata, 3364K rodata, 2096K init, 9888K bss, 389840K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 34386 entries in 135 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU event tracing is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS:33024 nr_irqs:1096 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.008000] tsc: PIT calibration matches HPET. 1 loops
[    0.008000] tsc: Detected 3593.164 MHz processor
[    0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.32 BogoMIPS (lpj=14372656)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] ACPI: Core revision 20170303
[    0.008000] Security Framework initialized
[    0.008000] AppArmor: AppArmor initialized
[    0.008000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.008000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008000] LVT offset 1 assigned for vector 0xf9
[    0.008000] LVT offset 2 assigned for vector 0xf4
[    0.008000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.008000] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.008000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.008000] Spectre V2 : Mitigation: Full AMD retpoline
[    0.008000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.008000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.008000] Spectre V2 : User space: Vulnerable
[    0.008000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.008000] Freeing SMP alternatives memory: 32K
[    0.020002] Switched APIC routing to physical flat.
[    0.020779] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064000] smpboot: CPU0: AMD Ryzen 5 2600X Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.064000] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.064000] ... version:                0
[    0.064000] ... bit width:              48
[    0.064000] ... generic registers:      6
[    0.064000] ... value mask:             0000ffffffffffff
[    0.064000] ... max period:             00007fffffffffff
[    0.064000] ... fixed-purpose events:   0
[    0.064000] ... event mask:             000000000000003f
[    0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064000] smp: Bringing up secondary CPUs ...
[    0.064000] x86: Booting SMP configuration:
[    0.064000] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.086197] smp: Brought up 1 node, 12 CPUs
[    0.086197] smpboot: Max logical packages: 2
[    0.086197] smpboot: Total of 12 processors activated (86235.93 BogoMIPS)
[    0.119314] node 0 initialised, 2649839 pages in 36ms
[    0.120292] devtmpfs: initialized
[    0.120292] x86/mm: Memory block size: 128MB
[    0.122234] evm: security.selinux
[    0.122234] evm: security.ima
[    0.122234] evm: security.capability
[    0.122249] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[    0.122249] PM: Registering ACPI NVS region [mem 0xdc402000-0xdc7d8fff] (4026368 bytes)
[    0.122249] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.122249] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.122249] pinctrl core: initialized pinctrl subsystem
[    0.122249] RTC time:  8:42:39, date: 11/01/19
[    0.122249] NET: Registered protocol family 16
[    0.122249] cpuidle: using governor ladder
[    0.122249] cpuidle: using governor menu
[    0.124026] ACPI: bus type PCI registered
[    0.124027] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.124064] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.124066] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.124072] PCI: Using configuration type 1 for base access
[    0.124369] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.124369] mtrr: probably your BIOS does not setup all CPUs.
[    0.124370] mtrr: corrected configuration.
[    0.124874] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.124874] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.124874] ACPI: Added _OSI(Module Device)
[    0.124874] ACPI: Added _OSI(Processor Device)
[    0.124874] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.124874] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134197] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.134236] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.137053] ACPI: Interpreter enabled
[    0.137064] ACPI: (supports S0 S3 S4 S5)
[    0.137064] ACPI: Using IOAPIC for interrupt routing
[    0.137287] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.137528] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.145392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.145395] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.145542] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.145682] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.145691] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.145991] PCI host bridge to bus 0000:00
[    0.145993] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.145993] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.145994] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.145995] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.145995] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.145996] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.145997] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.145997] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.145998] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.146003] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.146073] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.146158] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.146221] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.146325] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.146855] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.146926] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.148033] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.148156] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.148259] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.148335] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.148393] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.148953] pci 0000:00:07.1: enabling Extended Tags
[    0.149030] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.149118] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.149174] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.149200] pci 0000:00:08.1: enabling Extended Tags
[    0.149277] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.149402] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.149603] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.149808] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.149855] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.149902] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.149949] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.149996] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.150042] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.150088] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.150134] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.150270] pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.150287] pci 0000:03:00.0: reg 0x10: [mem 0xf77a0000-0xf77a7fff 64bit]
[    0.150364] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.150430] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
[    0.150470] pci 0000:03:00.1: reg 0x24: [mem 0xf7780000-0xf779ffff]
[    0.150477] pci 0000:03:00.1: reg 0x30: [mem 0xf7700000-0xf777ffff pref]
[    0.150513] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.150560] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
[    0.150626] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.164016] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.164019] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.164020] pci 0000:00:01.3:   bridge window [mem 0xf7500000-0xf77fffff]
[    0.164105] pci 0000:1d:00.0: [1022:43c7] type 01 class 0x060400
[    0.164185] pci 0000:1d:00.0: PME# supported from D3hot D3cold
[    0.164249] pci 0000:1d:01.0: [1022:43c7] type 01 class 0x060400
[    0.164328] pci 0000:1d:01.0: PME# supported from D3hot D3cold
[    0.164394] pci 0000:1d:04.0: [1022:43c7] type 01 class 0x060400
[    0.164473] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[    0.164537] pci 0000:1d:05.0: [1022:43c7] type 01 class 0x060400
[    0.164616] pci 0000:1d:05.0: PME# supported from D3hot D3cold
[    0.164680] pci 0000:1d:06.0: [1022:43c7] type 01 class 0x060400
[    0.164759] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[    0.164826] pci 0000:1d:07.0: [1022:43c7] type 01 class 0x060400
[    0.164905] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[    0.164982] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.164986] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.164989] pci 0000:03:00.2:   bridge window [mem 0xf7500000-0xf76fffff]
[    0.165022] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.165060] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.165104] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.165142] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.165195] pci 0000:24:00.0: [1b21:0612] type 00 class 0x010601
[    0.165216] pci 0000:24:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.165227] pci 0000:24:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.165238] pci 0000:24:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.165250] pci 0000:24:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.165261] pci 0000:24:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.165273] pci 0000:24:00.0: reg 0x24: [mem 0xf7600000-0xf76001ff]
[    0.176017] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.176021] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.176024] pci 0000:1d:06.0:   bridge window [mem 0xf7600000-0xf76fffff]
[    0.176075] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
[    0.176107] pci 0000:25:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.176141] pci 0000:25:00.0: reg 0x18: [mem 0xf7504000-0xf7504fff 64bit]
[    0.176162] pci 0000:25:00.0: reg 0x20: [mem 0xf7500000-0xf7503fff 64bit]
[    0.176290] pci 0000:25:00.0: supports D1 D2
[    0.176290] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188033] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.188037] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.188039] pci 0000:1d:07.0:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.188143] pci 0000:26:00.0: [10de:1c03] type 00 class 0x030000
[    0.188165] pci 0000:26:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.188177] pci 0000:26:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.188190] pci 0000:26:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.188198] pci 0000:26:00.0: reg 0x24: [io  0xf000-0xf07f]
[    0.188206] pci 0000:26:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.188347] pci 0000:26:00.1: [10de:10f1] type 00 class 0x040300
[    0.188361] pci 0000:26:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.200023] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.200026] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.200028] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.200031] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.200111] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[    0.200139] pci 0000:27:00.0: enabling Extended Tags
[    0.200196] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[    0.200210] pci 0000:27:00.2: reg 0x18: [mem 0xf7300000-0xf73fffff]
[    0.200220] pci 0000:27:00.2: reg 0x24: [mem 0xf7400000-0xf7401fff]
[    0.200226] pci 0000:27:00.2: enabling Extended Tags
[    0.200288] pci 0000:27:00.3: [1022:145f] type 00 class 0x0c0330
[    0.200297] pci 0000:27:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit]
[    0.200316] pci 0000:27:00.3: enabling Extended Tags
[    0.200342] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[    0.200397] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.200400] pci 0000:00:07.1:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.200465] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[    0.200495] pci 0000:28:00.0: enabling Extended Tags
[    0.200556] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[    0.200581] pci 0000:28:00.2: reg 0x24: [mem 0xf7808000-0xf7808fff]
[    0.200587] pci 0000:28:00.2: enabling Extended Tags
[    0.200614] pci 0000:28:00.2: PME# supported from D3hot D3cold
[    0.200657] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[    0.200665] pci 0000:28:00.3: reg 0x10: [mem 0xf7800000-0xf7807fff]
[    0.200688] pci 0000:28:00.3: enabling Extended Tags
[    0.200714] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[    0.200771] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.200774] pci 0000:00:08.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.201081] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.201133] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.201178] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.201234] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.201285] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.201326] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.201368] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.201410] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.201813] iommu: Default domain type: Passthrough 
[    0.201821] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[    0.201821] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.201821] pci 0000:26:00.0: vgaarb: bridge control possible
[    0.201821] vgaarb: loaded
[    0.201821] SCSI subsystem initialized
[    0.201821] libata version 3.00 loaded.
[    0.201821] Linux cec interface: v0.10
[    0.201821] EDAC MC: Ver: 3.0.0
[    0.201821] PCI: Using ACPI for IRQ routing
[    0.204742] PCI: pci_cache_line_size set to 64 bytes
[    0.204802] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.204802] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.204803] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.204803] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.204804] e820: reserve RAM buffer [mem 0xdae1f000-0xdbffffff]
[    0.204804] e820: reserve RAM buffer [mem 0xdc402000-0xdfffffff]
[    0.204805] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.204805] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.204863] NetLabel: Initializing
[    0.204864] NetLabel:  domain hash size = 128
[    0.204864] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.204874] NetLabel:  unlabeled traffic allowed by default
[    0.204886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.204886] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.208232] clocksource: Switched to clocksource hpet
[    0.215594] VFS: Disk quotas dquot_6.6.0
[    0.215610] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.215685] AppArmor: AppArmor Filesystem Enabled
[    0.215712] pnp: PnP ACPI init
[    0.215821] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.215823] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.215877] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.215879] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.215946] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.216113] system 00:03: [io  0x0280-0x028f] has been reserved
[    0.216114] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.216115] system 00:03: [io  0x02a0-0x02af] has been reserved
[    0.216116] system 00:03: [io  0x02b0-0x02bf] has been reserved
[    0.216117] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.216327] pnp 00:04: [dma 0 disabled]
[    0.216351] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.216556] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.216557] system 00:05: [io  0x040b] has been reserved
[    0.216557] system 00:05: [io  0x04d6] has been reserved
[    0.216558] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.216559] system 00:05: [io  0x0c14] has been reserved
[    0.216559] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.216560] system 00:05: [io  0x0c52] has been reserved
[    0.216561] system 00:05: [io  0x0c6c] has been reserved
[    0.216561] system 00:05: [io  0x0c6f] has been reserved
[    0.216562] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.216562] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.216563] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.216564] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.216564] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.216565] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.216566] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.216566] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.216567] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.216568] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.216569] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.216569] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.216570] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.216572] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.216573] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.216573] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.216574] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.216575] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.216947] pnp: PnP ACPI: found 6 devices
[    0.222833] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.222891] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.222901] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.222910] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.222918] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.222927] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.222929] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.222932] pci 0000:1d:06.0:   bridge window [mem 0xf7600000-0xf76fffff]
[    0.222938] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.222939] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.222942] pci 0000:1d:07.0:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.222948] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.222949] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.222952] pci 0000:03:00.2:   bridge window [mem 0xf7500000-0xf76fffff]
[    0.222958] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.222959] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.222961] pci 0000:00:01.3:   bridge window [mem 0xf7500000-0xf77fffff]
[    0.222964] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.222965] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.222968] pci 0000:00:03.1:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.222970] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.222973] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.222975] pci 0000:00:07.1:   bridge window [mem 0xf7200000-0xf74fffff]
[    0.222978] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.222980] pci 0000:00:08.1:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.222984] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.222985] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.222985] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.222986] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.222987] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.222987] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.222988] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.222988] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.222989] pci_bus 0000:03: resource 0 [io  0xd000-0xefff]
[    0.222990] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf77fffff]
[    0.222991] pci_bus 0000:1d: resource 0 [io  0xd000-0xefff]
[    0.222991] pci_bus 0000:1d: resource 1 [mem 0xf7500000-0xf76fffff]
[    0.222992] pci_bus 0000:24: resource 0 [io  0xe000-0xefff]
[    0.222993] pci_bus 0000:24: resource 1 [mem 0xf7600000-0xf76fffff]
[    0.222993] pci_bus 0000:25: resource 0 [io  0xd000-0xdfff]
[    0.222994] pci_bus 0000:25: resource 1 [mem 0xf7500000-0xf75fffff]
[    0.222995] pci_bus 0000:26: resource 0 [io  0xf000-0xffff]
[    0.222995] pci_bus 0000:26: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.222996] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.222996] pci_bus 0000:27: resource 1 [mem 0xf7200000-0xf74fffff]
[    0.222997] pci_bus 0000:28: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.223056] NET: Registered protocol family 2
[    0.223205] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.223349] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.223475] TCP: Hash tables configured (established 131072 bind 65536)
[    0.223512] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.223549] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.223616] NET: Registered protocol family 1
[    0.223619] NET: Registered protocol family 44
[    0.223750] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.223755] pci 0000:26:00.1: Linked as a consumer to 0000:26:00.0
[    0.223883] PCI: CLS 64 bytes, default 64
[    0.223905] Unpacking initramfs...
[    1.672601] Freeing initrd memory: 24040K
[    1.672627] AMD-Vi: IOMMU performance counters supported
[    1.672815] iommu: Adding device 0000:00:01.0 to group 0
[    1.672830] iommu: Adding device 0000:00:01.3 to group 1
[    1.672842] iommu: Adding device 0000:00:02.0 to group 2
[    1.672858] iommu: Adding device 0000:00:03.0 to group 3
[    1.672879] iommu: Adding device 0000:00:03.1 to group 4
[    1.672892] iommu: Adding device 0000:00:04.0 to group 5
[    1.672906] iommu: Adding device 0000:00:07.0 to group 6
[    1.672918] iommu: Adding device 0000:00:07.1 to group 7
[    1.672933] iommu: Adding device 0000:00:08.0 to group 8
[    1.672945] iommu: Adding device 0000:00:08.1 to group 9
[    1.672960] iommu: Adding device 0000:00:14.0 to group 10
[    1.672969] iommu: Adding device 0000:00:14.3 to group 10
[    1.672998] iommu: Adding device 0000:00:18.0 to group 11
[    1.673008] iommu: Adding device 0000:00:18.1 to group 11
[    1.673017] iommu: Adding device 0000:00:18.2 to group 11
[    1.673026] iommu: Adding device 0000:00:18.3 to group 11
[    1.673035] iommu: Adding device 0000:00:18.4 to group 11
[    1.673044] iommu: Adding device 0000:00:18.5 to group 11
[    1.673053] iommu: Adding device 0000:00:18.6 to group 11
[    1.673062] iommu: Adding device 0000:00:18.7 to group 11
[    1.673089] iommu: Adding device 0000:03:00.0 to group 12
[    1.673106] iommu: Adding device 0000:03:00.1 to group 12
[    1.673122] iommu: Adding device 0000:03:00.2 to group 12
[    1.673131] iommu: Adding device 0000:1d:00.0 to group 12
[    1.673140] iommu: Adding device 0000:1d:01.0 to group 12
[    1.673149] iommu: Adding device 0000:1d:04.0 to group 12
[    1.673157] iommu: Adding device 0000:1d:05.0 to group 12
[    1.673165] iommu: Adding device 0000:1d:06.0 to group 12
[    1.673174] iommu: Adding device 0000:1d:07.0 to group 12
[    1.673185] iommu: Adding device 0000:24:00.0 to group 12
[    1.673202] iommu: Adding device 0000:25:00.0 to group 12
[    1.673233] iommu: Adding device 0000:26:00.0 to group 13
[    1.673254] iommu: Adding device 0000:26:00.1 to group 13
[    1.673270] iommu: Adding device 0000:27:00.0 to group 14
[    1.673284] iommu: Adding device 0000:27:00.2 to group 15
[    1.673298] iommu: Adding device 0000:27:00.3 to group 16
[    1.673313] iommu: Adding device 0000:28:00.0 to group 17
[    1.673327] iommu: Adding device 0000:28:00.2 to group 18
[    1.673341] iommu: Adding device 0000:28:00.3 to group 19
[    1.673581] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    1.673582] AMD-Vi: Extended features (0xf77ef22294ada):
[    1.673582]  PPR NX GT IA GA PC GA_vAPIC
[    1.673584] AMD-Vi: Interrupt remapping enabled
[    1.673584] AMD-Vi: virtual APIC enabled
[    1.674030] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.674031] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.674033] software IO TLB [mem 0xd6e1f000-0xdae1f000] (64MB) mapped at [ffff8800d6e1f000-ffff8800dae1efff]
[    1.674061] amd_uncore: AMD NB counters detected
[    1.674063] amd_uncore: AMD LLC counters detected
[    1.674486] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    1.674516] Scanning for low memory corruption every 60 seconds
[    1.674809] audit: initializing netlink subsys (disabled)
[    1.674857] audit: type=2000 audit(1572597759.672:1): state=initialized audit_enabled=0 res=1
[    1.675135] workingset: timestamp_bits=37 max_order=22 bucket_order=0
[    1.675325] zbud: loaded
[    1.677308] Key type asymmetric registered
[    1.677308] Asymmetric key parser 'x509' registered
[    1.677313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.677358] io scheduler noop registered
[    1.677358] io scheduler deadline registered
[    1.677367] io scheduler cfq registered (default)
[    1.677367] io scheduler mq-deadline registered
[    1.677368] io scheduler kyber registered
[    1.677372] io scheduler bfq registered
[    1.680402] pcieport 0000:00:01.3: AER enabled with IRQ 282
[    1.680418] pcieport 0000:00:03.1: AER enabled with IRQ 283
[    1.680430] pcieport 0000:00:07.1: AER enabled with IRQ 284
[    1.680441] pcieport 0000:00:08.1: AER enabled with IRQ 286
[    1.680449] pcieport 0000:00:01.3: Signaling PME with IRQ 282
[    1.680460] pcieport 0000:00:03.1: Signaling PME with IRQ 283
[    1.680471] pcieport 0000:00:07.1: Signaling PME with IRQ 284
[    1.680483] pcieport 0000:00:08.1: Signaling PME with IRQ 286
[    1.680500] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.680514] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[    1.680514] vesafb: scrolling: redraw
[    1.680515] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.680522] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90002800000, using 6912k, total 6912k
[    1.699218] Console: switching to colour frame buffer device 210x65
[    1.717761] fb0: VESA VGA frame buffer device
[    1.717797] Monitor-Mwait will be used to enter C-1 state
[    1.718575] GHES: HEST is not enabled!
[    1.718643] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.739536] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.740633] Non-volatile memory driver v1.3
[    1.740655] Linux agpgart interface v0.103
[    1.741621] i8042: PNP: No PS/2 controller found.
[    1.741669] mousedev: PS/2 mouse device common for all mice
[    1.741715] rtc_cmos 00:02: RTC can wake from S4
[    1.741905] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.741954] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.742174] ledtrig-cpu: registered to indicate activity on CPUs
[    1.742180] hidraw: raw HID events driver (C) Jiri Kosina
[    1.742280] NET: Registered protocol family 10
[    1.745520] Segment Routing with IPv6
[    1.746238] mce: Using 23 MCE banks
[    1.746242] microcode: microcode updated early to new patch_level=0x0800820b
[    1.746254] microcode: CPU0: patch_level=0x0800820b
[    1.746262] microcode: CPU1: patch_level=0x0800820b
[    1.746272] microcode: CPU2: patch_level=0x0800820b
[    1.746282] microcode: CPU3: patch_level=0x0800820b
[    1.746292] microcode: CPU4: patch_level=0x0800820b
[    1.746302] microcode: CPU5: patch_level=0x0800820b
[    1.746319] microcode: CPU6: patch_level=0x0800820b
[    1.746331] microcode: CPU7: patch_level=0x0800820b
[    1.746344] microcode: CPU8: patch_level=0x0800820b
[    1.746356] microcode: CPU9: patch_level=0x0800820b
[    1.746370] microcode: CPU10: patch_level=0x0800820b
[    1.746379] microcode: CPU11: patch_level=0x0800820b
[    1.746408] microcode: Microcode Update Driver: v2.2.
[    1.746415] sched_clock: Marking stable (1746402366, 0)->(1930675569, -184273203)
[    1.746684] registered taskstats version 1
[    1.746700] zswap: loaded using pool lzo/zbud
[    1.746801] page_owner is disabled
[    1.749286] Key type big_key registered
[    1.750459] Key type encrypted registered
[    1.750460] AppArmor: AppArmor sha1 policy hashing enabled
[    1.750462] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.750463] ima: Allocated hash algorithm: sha256
[    1.750473] evm: HMAC attrs: 0x1
[    1.750589]   Magic number: 11:635:724
[    1.750719] rtc_cmos 00:02: setting system clock to 2019-11-01 08:42:40 UTC (1572597760)
[    1.750763] PM: Checking hibernation image partition /dev/sda2
[    1.750765] PM: Hibernation image not present or could not be loaded.
[    1.752154] Freeing unused kernel memory: 2096K
[    1.780384] Write protecting the kernel read-only data: 16384k
[    1.780895] Freeing unused kernel memory: 2020K
[    1.782002] Freeing unused kernel memory: 732K
[    1.789841] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[    1.789898] systemd[1]: Detected architecture x86-64.
[    1.789899] systemd[1]: Running in initial RAM disk.
[    1.789907] systemd[1]: Set hostname to <Didon>.
[    1.813149] random: systemd: uninitialized urandom read (16 bytes read)
[    1.813161] systemd[1]: Reached target Timers.
[    1.813196] random: systemd: uninitialized urandom read (16 bytes read)
[    1.813223] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.813239] random: systemd: uninitialized urandom read (16 bytes read)
[    1.813487] systemd[1]: Created slice System Slice.
[    1.813512] systemd[1]: Reached target Local File Systems.
[    1.813547] systemd[1]: Listening on udev Control Socket.
[    1.813569] systemd[1]: Reached target Swap.
[    1.817331] alua: device handler registered
[    1.817522] emc: device handler registered
[    1.817756] rdac: device handler registered
[    1.820023] device-mapper: uevent: version 1.0.3
[    1.820092] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.940706] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.940750] ACPI: Power Button [PWRB]
[    1.940794] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.940837] ACPI: Power Button [PWRF]
[    1.949991] ahci 0000:03:00.1: version 3.0
[    1.950125] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    1.950158] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    1.950159] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    1.950395] ACPI: bus type USB registered
[    1.950413] usbcore: registered new interface driver usbfs
[    1.950445] usbcore: registered new interface driver hub
[    1.950482] usbcore: registered new device driver usb
[    1.950844] scsi host0: ahci
[    1.950867] ipmi message handler version 39.2
[    1.950947] scsi host1: ahci
[    1.951044] scsi host2: ahci
[    1.951116] ipmi device interface
[    1.951146] scsi host3: ahci
[    1.951245] scsi host4: ahci
[    1.951319] scsi host5: ahci
[    1.951412] scsi host6: ahci
[    1.951489] scsi host7: ahci
[    1.951520] ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 298
[    1.951521] ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 298
[    1.951522] ata3: DUMMY
[    1.951522] ata4: DUMMY
[    1.951523] ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 298
[    1.951525] ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 298
[    1.951525] ata7: DUMMY
[    1.951526] ata8: DUMMY
[    1.951666] ahci 0000:24:00.0: SSS flag set, parallel bus scan disabled
[    1.951704] ahci 0000:24:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.951706] ahci 0000:24:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    1.951943] scsi host8: ahci
[    1.952035] scsi host9: ahci
[    1.952064] ata9: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600100 irq 299
[    1.952066] ata10: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600180 irq 299
[    1.952176] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.952179] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    1.952316] scsi host10: ahci
[    1.952349] ata11: SATA max UDMA/133 abar m4096@0xf7808000 port 0xf7808100 irq 301
[    1.952871] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.952875] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    1.968482] nvidia: loading out-of-tree module taints kernel.
[    1.968490] nvidia: module license 'NVIDIA' taints kernel.
[    1.968490] Disabling lock debugging due to kernel taint
[    1.981682] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[    1.982063] nvidia 0000:26:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.005807] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    2.005999] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.006000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.006001] usb usb1: Product: xHCI Host Controller
[    2.006002] usb usb1: Manufacturer: Linux 4.12.14-lp151.28.20-default xhci-hcd
[    2.006002] usb usb1: SerialNumber: 0000:03:00.0
[    2.006097] hub 1-0:1.0: USB hub found
[    2.006109] hub 1-0:1.0: 10 ports detected
[    2.006564] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.006567] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.006568] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.006594] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.006607] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.006608] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.006608] usb usb2: Product: xHCI Host Controller
[    2.006609] usb usb2: Manufacturer: Linux 4.12.14-lp151.28.20-default xhci-hcd
[    2.006609] usb usb2: SerialNumber: 0000:03:00.0
[    2.006669] hub 2-0:1.0: USB hub found
[    2.006675] hub 2-0:1.0: 4 ports detected
[    2.007051] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    2.007055] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3
[    2.007154] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    2.007298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.007299] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.007299] usb usb3: Product: xHCI Host Controller
[    2.007300] usb usb3: Manufacturer: Linux 4.12.14-lp151.28.20-default xhci-hcd
[    2.007300] usb usb3: SerialNumber: 0000:27:00.3
[    2.007360] hub 3-0:1.0: USB hub found
[    2.007365] hub 3-0:1.0: 4 ports detected
[    2.007467] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    2.007469] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4
[    2.007479] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.007492] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.007492] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.007493] usb usb4: Product: xHCI Host Controller
[    2.007493] usb usb4: Manufacturer: Linux 4.12.14-lp151.28.20-default xhci-hcd
[    2.007494] usb usb4: SerialNumber: 0000:27:00.3
[    2.007548] hub 4-0:1.0: USB hub found
[    2.007554] hub 4-0:1.0: 4 ports detected
[    2.081655] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.26  Sun Oct 13 18:00:57 UTC 2019
[    2.090396] nvidia-uvm: Loaded the UVM driver, major device number 241.
[    2.145365] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  440.26  Sun Oct 13 17:39:54 UTC 2019
[    2.146129] [drm] [nvidia-drm] [GPU ID 0x00002600] Loading driver
[    2.146130] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:26:00.0 on minor 0
[    2.266487] ata9: SATA link down (SStatus 0 SControl 300)
[    2.266500] ata1: SATA link down (SStatus 0 SControl 330)
[    2.266682] ata11: SATA link down (SStatus 0 SControl 300)
[    2.344040] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.412058] usb 1-10: new low-speed USB device number 2 using xhci_hcd
[    2.516736] usb 3-2: New USB device found, idVendor=093a, idProduct=2521
[    2.516738] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.516739] usb 3-2: Product: USB OPTICAL MOUSE
[    2.541647] usbcore: registered new interface driver usbhid
[    2.541648] usbhid: USB HID core driver
[    2.542130] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:07.1/0000:27:00.3/usb3/3-2/3-2:1.0/0003:093A:2521.0001/input/input2
[    2.542202] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:27:00.3-2/input0
[    2.579088] ata2: SATA link down (SStatus 0 SControl 330)
[    2.684052] tsc: Refined TSC clocksource calibration: 3593.246 MHz
[    2.684063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb66efe9d, max_idle_ns: 440795351205 ns
[    2.740061] usb 1-10: New USB device found, idVendor=045e, idProduct=0750
[    2.740063] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.740064] usb 1-10: Product: Wired Keyboard 600
[    2.740065] usb 1-10: Manufacturer: Microsoft
[    2.775975] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.0/0003:045E:0750.0002/input/input3
[    2.832146] microsoft 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:03:00.0-10/input0
[    2.832304] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.1/0003:045E:0750.0003/input/input4
[    2.836805] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[    2.864540] usb 2-4: New USB device found, idVendor=0951, idProduct=1666
[    2.864541] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.864542] usb 2-4: Product: DataTraveler 3.0
[    2.864543] usb 2-4: Manufacturer: Kingston
[    2.864543] usb 2-4: SerialNumber: 08606E6D3FE2BE609335AEF5
[    2.868505] usb-storage 2-4:1.0: USB Mass Storage device detected
[    2.868616] scsi host11: usb-storage 2-4:1.0
[    2.868658] usbcore: registered new interface driver usb-storage
[    2.869047] usbcore: registered new interface driver uas
[    2.892149] microsoft 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:03:00.0-10/input1
[    3.056210] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.093494] ata5.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[    3.093495] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.153565] ata5.00: configured for UDMA/133
[    3.153788] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[    3.153973] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    3.154082] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.154083] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    3.154105] sd 4:0:0:0: [sda] Write Protect is off
[    3.154107] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.154138] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.202160]  sda: sda1 sda2
[    3.202511] sd 4:0:0:0: [sda] Attached SCSI disk
[    3.467272] ata6: SATA link down (SStatus 0 SControl 330)
[    3.708309] clocksource: Switched to clocksource tsc
[    3.819689] random: crng init done
[    3.819690] random: 7 urandom warning(s) missed due to ratelimiting
[    3.901130] scsi 11:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    3.901202] sd 11:0:0:0: Attached scsi generic sg1 type 0
[    3.901804] sd 11:0:0:0: [sdb] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[    3.903664] sd 11:0:0:0: [sdb] Write Protect is off
[    3.903665] sd 11:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.905535] sd 11:0:0:0: [sdb] No Caching mode page found
[    3.905629] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[    3.911480]  sdb: sdb1 sdb2
[    3.916032] sd 11:0:0:0: [sdb] Attached SCSI removable disk
[    3.944199] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.951885] ata10.00: ATA-9: LDLC, R0522A0, max UDMA/133
[    3.951887] ata10.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    3.963412] ata10.00: configured for UDMA/133
[    3.963514] scsi 9:0:0:0: Direct-Access     ATA      LDLC             2A0  PQ: 0 ANSI: 5
[    3.963663] sd 9:0:0:0: Attached scsi generic sg2 type 0
[    3.963678] sd 9:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    3.963690] sd 9:0:0:0: [sdc] Write Protect is off
[    3.963691] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.963705] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.964969]  sdc: sdc1 sdc2
[    3.965106] sd 9:0:0:0: [sdc] Attached SCSI disk
[    4.015994] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[    4.177841] systemd-journald[210]: Received SIGTERM from PID 1 (systemd).
[    4.200488] systemd: 18 output lines suppressed due to ratelimiting
[    4.577941] EXT4-fs (sdc2): re-mounted. Opts: acl,user_xattr
[    4.598265] systemd-journald[570]: Received request to flush runtime journal from PID 1
[    4.642916] audit: type=1400 audit(1572597763.385:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=603 comm="apparmor_parser"
[    4.651530] audit: type=1400 audit(1572597763.393:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=612 comm="apparmor_parser"
[    4.656858] audit: type=1400 audit(1572597763.401:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=617 comm="apparmor_parser"
[    4.665372] audit: type=1400 audit(1572597763.409:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=622 comm="apparmor_parser"
[    4.673382] audit: type=1400 audit(1572597763.417:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=628 comm="apparmor_parser"
[    4.680799] audit: type=1400 audit(1572597763.425:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2" pid=633 comm="apparmor_parser"
[    4.680800] audit: type=1400 audit(1572597763.425:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=633 comm="apparmor_parser"
[    4.680801] audit: type=1400 audit(1572597763.425:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=633 comm="apparmor_parser"
[    4.680802] audit: type=1400 audit(1572597763.425:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=633 comm="apparmor_parser"
[    4.723750] acpi_cpufreq: overriding BIOS provided _PSD data
[    4.738144] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.738145] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    4.739818] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.744414] ccp 0000:27:00.2: ccp enabled
[    4.744544] ccp 0000:27:00.2: psp enabled
[    4.744545] ccp 0000:27:00.2: enabled
[    4.745356] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    4.747822] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    4.747903] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
[    4.747909] sp5100_tco: I/O address 0x0cd6 already in use
[    4.753138] r8169 0000:25:00.0 eth0: RTL8168h/8111h at 0xffffc900019c1000, 70:85:c2:b0:df:ab, XID 14100800 IRQ 323
[    4.753141] r8169 0000:25:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.759002] AVX2 version of gcm_enc/dec engaged.
[    4.759003] AES CTR mode by8 optimization enabled
[    4.846137] snd_hda_intel 0000:26:00.1: Disabling MSI
[    4.846143] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[    4.892388] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.892389] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.892390] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.892391] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.892391] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.892392] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.892393] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.892394] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.904136] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input6
[    4.904170] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input7
[    4.904202] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input8
[    4.904239] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input9
[    4.904270] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input10
[    5.206918] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.293626] nct6775: Found NCT6779D or compatible chip at 0x2e:0x290
[    5.772716] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input11
[    5.772761] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input12
[    5.772802] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input13
[    5.772844] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input14
[    5.963303] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.974764] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.001772] Ebtables v2.0 registered
[    6.025842] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    6.064432] Loading iSCSI transport class v2.0-870.
[    6.079784] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    6.146953] Netfilter messages via NETLINK v0.30.
[    6.147624] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.165169] ip_set: protocol 6
[    6.226634] r8169 0000:25:00.0 eth0: link down
[    6.226636] r8169 0000:25:00.0 eth0: link down
[    6.226731] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.403688] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[    7.403849] caller _nv000906rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[    9.383401] r8169 0000:25:00.0 eth0: link up
[    9.383410] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.387439] r8169 0000:25:00.0 eth0: link down
[    9.484618] NET: Registered protocol family 17
[    9.948045] ccp 0000:27:00.2: sev command 0x4 timed out, disabling PSP 
[    9.948047] ccp 0000:27:00.2: SEV: failed to get status. Error: 0x0
[    9.952641] kvm: disabled by bios
[    9.998629] kvm: disabled by bios
[    9.999164] MCE: In-kernel MCE decoding enabled.
[   10.000460] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.000461] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.076731] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.076733] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.120882] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.120884] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.168775] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.168777] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.216898] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.216900] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.260847] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.260849] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.300667] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.300668] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.348908] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.348910] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.384656] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.384658] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.424737] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.424738] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.476864] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.476866] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.532622] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.532624] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   11.472348] r8169 0000:25:00.0 eth0: link up
[   46.434353] fuse init (API version 7.26)

Il y a bien des façons de passer à l’acte. Se taire en est une. Attribué à Jean-Bertrand Pontalis

+0 -0
Auteur du sujet

Après inspection de mon système, il s’avère que je tourne sans SWAP. Elle a disparue de mon fichier de montage (mais elle est toujours sur mon disque dure, donc pas le SSD qui n’était plus reconnu…).

Il y a bien des façons de passer à l’acte. Se taire en est une. Attribué à Jean-Bertrand Pontalis

+0 -0

Cette réponse a aidé l’auteur du sujet

Salut,

Pour moi ça sent le contrôleur SATA pas content. Ce qui vient souvent, de mon expérience, d’un nombre limité de choses :

  • le contrôleur en lui-même a un défaut, auquel cas pas d’autre choix que de changer de carte mère (ou essayer un autre contrôleur : certaines cartes mères en proposent un sur le southbridge en plus de celui fourni dans le processeur).
  • un disque est mal branché. Ce peut être ton SSD, un disque d’appoint, un lecteur DVD… Et c’est régulièrement un mauvais contact, que ce soit par un positionnement approximatif ou un grain de poussière (souffle un bon coup sur les contacts, et appuie bien !)
  • un disque secondaire a décidé de s’arrêter, ou de causer du trouble. Pour le contrôleur, c’est un peu comme un mauvais contact : ce qu’il reçoit ne lui plaît pas, mais ça ne se règle pas de la même manière.
  • comme tu l’as suspecté, la RAM. Le bug peut n’apparaître qu’une fois que la mémoire a un peu chauffé, ou que l’alimentation soit moins stable suite à un usage prolongé (donc en ayant chauffé aussi). Comme pour le contrôleur SATA, les contacts des barrettes avec leurs slots peuvent être mauvais, mais vu tes symptômes ça me semble être autre chose.

J’espère que tu trouveras solution à tes problèmes !

Édité par luxera

Auteur du sujet

le contrôleur en lui-même a un défaut, auquel cas pas d’autre choix que de changer de carte mère (ou essayer un autre contrôleur : certaines cartes mères en proposent un sur le southbridge en plus de celui fourni dans le processeur).

4 contrôleurs, deux disques, je vais pouvoir tester ça. ;)

Bon, je vais essayer de souffler tout ça et de reclancher tous les connecteurs, et je verrai si je perds à nouveau le disque ou si j’ai des gels dans les jours qui viennent. Mais depuis ce matin, tout roule.

PS : là tout de suite, je vérifie que mes sauvegardes sont à jour. Rappel : pensez à faire des sauvegardes.

Édité par Gabbro

Il y a bien des façons de passer à l’acte. Se taire en est une. Attribué à Jean-Bertrand Pontalis

+0 -0
Auteur du sujet

Je crois bien que @luxera avait raison.

Pour moi ça sent le contrôleur SATA pas content.

J’ai une prise SATA qui ne reconnaît aucun disque. Deux autres qui marchent, mais dans lesquels je ne peux pas brancher n’importe comment : SSD en 1 + HDD en 3 boot mais le système ne se lance pas, le contraire (SSD en 3, HDD en 1) marche parfaitement. La prise 4 marche très bien mais ne semble pas pouvoir être la prise de boot par défaut (donc il faut lancer via le BIOS à chaque fois, c’est lourd).

Là, de suite, j’ai un contournement. Merci. Il me reste plus d’un an de garantie, donc ça va probablement attendre un petit peu (après les fêtes, quand ils auront du personnel de disponible :-° ), mais le problème est (enfin !) circonscrit.

Encore merci. :)

Il y a bien des façons de passer à l’acte. Se taire en est une. Attribué à Jean-Bertrand Pontalis

+1 -0
Vous devez être connecté pour pouvoir poster un message.
Connexion

Pas encore inscrit ?

Créez un compte en une minute pour profiter pleinement de toutes les fonctionnalités de Zeste de Savoir. Ici, tout est gratuit et sans publicité.
Créer un compte